Loading... Please wait...

PRE-ORDER ONLY Short Crust Case

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
Price:
$24.90
SKU:
PIS-SHCRUST-PRE
Brand:
Pre-Order Stock:
200
This product is available for pre-order only


Product Description

Fish Dish Raspberry Pi LED Buzzer Board

ORDER THIS PRODUCT ONLY IF PRE-ORDERING NON-STOCK ITEMS

 

Product Description

 

Short Crust is a case for the Raspberry Pi which is designed to look attractive, be easy to use and be adaptable for different types of projects. It has a simple and elegant look and is designed to be used with a variety of projects – and look great whilst doing so. It features a very easy to use “snap in place” mounting method for the Raspberry Pi which keeps it very secure, but easy to remove from the case when you want to. It uses a simple flat top cover, which makes it extremely easy for you to customise the case yourself – with different colours or materials. Additionally due to the brass screw thread mounting points you can customise the case in other ways – with extensions and stacking of components above the Raspberry Pi.

 

Cable management becomes a breeze with the Short Crust case, and it keeps your SD card very well protected due to its extended length.

 

Features include:

 

Simple, clean design with easy access to all inputs and outputs.MicroUSB power relocated to the same side as USB and Ethernet ports for tidy cable management.Raspberry Pi snaps into place – secure, no rattling, and easily removable.Internal mounting holes for attaching the case directly to your project / prototype.Removable cover for hiding the RCA and 3.5mm audio ports when not in use.‘Smoke’ tinted acrylic covers for a clean look while leaving the Raspberry Pi visible.Simple, flat covers to make it easier for you to create your own and customize the look of the case.Open top design with brass screw thread mounting points to allow user made, custom design extensions and stacking of components above the Raspberry Pi.SD card doesn’t protrude from the case – looks attractive, easily removable, protected from accidental knocks.

 

RESOURCES

 

There are some short assembly instructions and videos for you which can be viewed at the following link:

 

Assembly Instructions

 

PRODUCT VIDEO

 

Here is a video of the Short Crust case, made by our friends at Raspberry Pi for Beginners:

 

 

 

Manufacturer website: http://www.pi-supply.com/product/shortcrust-perfect-base-raspberry-pi/

Here my short test program.
If you press the button the traffic light changes to green ans sounds the buzzer.

#!/usr/bin/python
import RPi.GPIO as GPIO
import time

LEDGPIOPin_Gruen = 4
LEDGPIOPin_Rot = 9
LEDGPIOPin_Gelb = 22
LEDGPIOPin_BUZZ = 8
LEDGPIOPin_BUTTON = 7

GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)

GPIO.setup(LEDGPIOPin_Gruen, GPIO.OUT)
GPIO.setup(LEDGPIOPin_Gelb, GPIO.OUT)
GPIO.setup(LEDGPIOPin_Rot, GPIO.OUT)

GPIO.setup(LEDGPIOPin_BUZZ, GPIO.OUT)

GPIO.setup(LEDGPIOPin_BUTTON, GPIO.IN)

DELAYON = 1.0
DELAYBUZZ = 0.1
i = 0

GPIO.output(LEDGPIOPin_Rot, GPIO.HIGH)

while True:
if (GPIO.input(LEDGPIOPin_BUTTON) == True):
GPIO.output(LEDGPIOPin_Rot, GPIO.LOW)

GPIO.output(LEDGPIOPin_Gelb, GPIO.HIGH)
time.sleep(DELAYON)
GPIO.output(LEDGPIOPin_Gelb, GPIO.LOW)

GPIO.output(LEDGPIOPin_Gruen, GPIO.HIGH)
while i < 25:
GPIO.output(LEDGPIOPin_BUZZ, GPIO.HIGH)
time.sleep(DELAYBUZZ)
GPIO.output(LEDGPIOPin_BUZZ, GPIO.LOW)
time.sleep(DELAYBUZZ)
i += 1
i = 0
GPIO.output(LEDGPIOPin_Gruen, GPIO.LOW)

GPIO.output(LEDGPIOPin_Gelb, GPIO.HIGH)
time.sleep(DELAYON)
GPIO.output(LEDGPIOPin_Gelb, GPIO.LOW)

GPIO.output(LEDGPIOPin_Rot, GPIO.HIGH)

- See more at: http://www.pi-supply.com/product/fish-dish-raspberry-pi-led-buzzer-board/#sthash.PVgcuNQ4.dpuf
(http://kck.st/15L0dMq)

reakout board for the Raspberry Pi. I make it easy to connect electronics.

  • I’m compact. Really compact. I add less than 2mm to the height of your Raspberry Pi and 1mm to to width.
  • I have well labelled pins, grouped together logically, including GPIO, I2C, SPI, UART and power.
  • I have female headers – you can poke jumpers right in.
  • I have lots of GND and 5V pins – you need those a lot.
  • I’m easy to make. A good project to learn to solder with.
  • I’m low cost.
  • I’m fully open source hardware. Fork me, tweak me, share me.

View more info on Kickstarter here:

- See more at: http://www.pi-supply.com/product/pi-crust-easily-connect-electronics-to-your-raspberry-pi/#!prettyPhoto

reakout board for the Raspberry Pi. I make it easy to connect electronics.

  • I’m compact. Really compact. I add less than 2mm to the height of your Raspberry Pi and 1mm to to width.
  • I have well labelled pins, grouped together logically, including GPIO, I2C, SPI, UART and power.
  • I have female headers – you can poke jumpers right in.
  • I have lots of GND and 5V pins – you need those a lot.
  • I’m easy to make. A good project to learn to solder with.
  • I’m low cost.
  • I’m fully open source hardware. Fork me, tweak me, share me.

View more info on Kickstarter here:

- See more at: http://www.pi-supply.com/product/pi-crust-easily-connect-electronics-to-your-raspberry-pi/#!prettyPhoto

reakout board for the Raspberry Pi. I make it easy to connect electronics.

  • I’m compact. Really compact. I add less than 2mm to the height of your Raspberry Pi and 1mm to to width.
  • I have well labelled pins, grouped together logically, including GPIO, I2C, SPI, UART and power.
  • I have female headers – you can poke jumpers right in.
  • I have lots of GND and 5V pins – you need those a lot.
  • I’m easy to make. A good project to learn to solder with.
  • I’m low cost.
  • I’m fully open source hardware. Fork me, tweak me, share me.

View more info on Kickstarter here:

- See more at: http://www.pi-supply.com/product/pi-crust-easily-connect-electronics-to-your-raspberry-pi/#!prettyPhoto

reakout board for the Raspberry Pi. I make it easy to connect electronics.

  • I’m compact. Really compact. I add less than 2mm to the height of your Raspberry Pi and 1mm to to width.
  • I have well labelled pins, grouped together logically, including GPIO, I2C, SPI, UART and power.
  • I have female headers – you can poke jumpers right in.
  • I have lots of GND and 5V pins – you need those a lot.
  • I’m easy to make. A good project to learn to solder with.
  • I’m low cost.
  • I’m fully open source hardware. Fork me, tweak me, share me.

View more info on Kickstarter here:

- See more at: http://www.pi-supply.com/product/pi-crust-easily-connect-electronics-to-your-raspberry-pi/#!prettyPhoto

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...